01 / 11
Stratus Neuro

REMI Epitel Setup Guide

For In-Home EEG Technicians

02 / 11

What You'll Need

Tablet
Phone
5 Bags of Sensors
Stickers -- 20 total
Night Before Charge & Power On

Charge phone & tablet overnight with power on so updates install before your appointment.

Equipment Obtain Equipment

From your local market. If not available, shipped via FedEx. Bring all 5 sensor packs to every setup.

03 / 11
Important

What to Expect

This is NOT a typical setup. You will set up the REMI device ONLY.

4 Small Square Electrodes

2 on forehead, 2 behind ears at T5 and T6

Up to 30 Days

Patient can shower (removes electrodes), replaces stickers daily

No Video

There is NO VIDEO with these exams

Push-Button Log

Patient uses this to record events

04 / 11

How This Setup Is Different

Standard Setup

  • Marking & measuring
  • Tap test
  • Biocals
  • Wire maintenance
  • Routine checks

REMI Epitel

  • 4 sensors with stickers
  • Tablet
  • Phone & charger
  • That's it!
05 / 11
Patient Education

Your Primary Focus

1

How to apply electrodes themselves

2

Daily sticker changes

After showering -- electrodes can't be worn in shower

3

How to use the push-button log to record events

All standard paperwork still applies -- consent, AOB, and tech report.

06 / 11

Getting Started

1

Press Start on the REMI Tablet

2

Enter Patient & Session Information

3

Locate and Scan QR or Barcode (x4)

4

Remove Pouch Contents

07 / 11

Prepare Sensors

1

Activate all sensors

Press button on each of the 4 sensors

2

Wait for sensors to connect

Green indicators appear

3

Open sticker pouch

4

Peel blue liner first

5

Place sticker on sensor

6

Peel clear liner

08 / 11
4 Locations

Sensor Placement

Left Ear (behind)

Clean with prep pad first

Right Ear (behind)

Clean with prep pad first

Left Forehead

 

Right Forehead

 

Do NOT activate the next sensor until the previous test is complete. Place → Activate → Wait for connection → Press TEST → Repeat.

09 / 11
Read Carefully

Important Workflow Change

Up to 1 Hour
for first strip to transmit
1

Introduce yourself, complete setup & patient education

2

BEFORE starting paperwork

Notify monitoring via Epitel thread

3

Complete paperwork while waiting

4

If first strip not yet transmitted

Wait in car or nearby

5

Once transmission is confirmed

You're all set!

10 / 11

Before You Leave

TAKE with you

The Tablet

LEAVE with patient

The Phone

Transmission confirmed
Patient educated on daily sticker changes
Patient knows how to use push-button log
All paperwork complete

No wire maintenance, no routine checks, no marking -- it's truly a quick and easy setup.

11 / 11
Stratus Neuro

Questions?

Contact your Senior Manager or reach out to experienced team members who have completed REMI setups.